KOMATSU PC35MR-5
- Share
Get a quote
2024
Komastu
PC35MR-5
New
Ontario
KOMATSU PC35MR-5 MINI EXCAVATOR — PERFORMANCE & VERSATILITY
The PC35MR-5 is an hydraulic mini excavator with tight tail swing
radius and swing booms that hug the machine to help with work
in tight spaces. PC35MR-5 uses up to five percent less fuel
than its MR-3 predecessors, with no loss of performance or
productivity. The short-tail PC30/35MR-5 delivers optimal
power and digging speed, even in confined spaces where
traditional machines can’t work: yards, road works, demolition
sites, sewers, etc. Sturdy and very stable, it guarantees
maximum safety and offers complete operator confidence in any
working conditions. The wide-opening engine bonnets provide a
quick access to daily inspection points. The fuel and the
hydraulic oil tanks are located under the side bonnet, in a
safe and easy-to-reach position. In addition, the cab easily
tilts back for major maintenance tasks. The machine features a
dedicated piping for power tilt operation and a single effect
hydraulic quick coupler line. The Lehnhoff Powertilt
installation enhances the versatility of the machine by
providing a flexible tool of proven reliability. Piping is
routed over the arm for better protection and long lasting
design.
POWERFUL AND ENVIRONMENTALLY FRIENDLY
• Low consumption EU Stage V engine • Komatsu fuel-saving technology
• 6 selectable working modes • Auto-deceleration and idle shutdown
• Dial type fuel control
FIRST-CLASS COMFORT • Newly designed
cab • Improved operator convenience • Multi-function monitor
with high resolution 3,5” LCD color display • Multiple
accessories around the operator’s seat
MAXIMIZED EFFICIENCY •
Powertilt option (PC35MR-5) • Many configurations to suit the
job at handSAFETY FIRST • Neutral position detection system •
Emergency engine stop switch • Seat belt caution indicator •
Large transport tie down points
EASY MAINTENANCE • Tilting cab
• Wide opening engine hood • Maintenance information displayed
on the monitor
KOMTRAX • Komatsu Wireless Monitoring System •
3G mobile communications • Integrated communication
antennaSimilar models may be shown in addition to the featured
model. Equipment may be shown with options. Specifications are
subject to change without prior notice."
Engine
| Model | Komatsu 3D88E-7* |
| Type | Water-cooled, direct injection |
| Number of cylinders | 3 |
| Bore | 3.46 in |
| Stroke | 3.54 in |
| Piston displacement | 100.2 in³ |
| Horsepower: | |
| SAE J1995 - Gross | 24.4 HP |
| ISO 9249 / SAE J1349 - Net | 24.4 HP |
| Rated rpm | 2,200 |
| Fan drive method for radiator cooling | Mechanical |
*EPA Tier 4 Final emissions certified
Hydraulics
| Number of selectable working modes |
2 |
| Main pumps: | |
| Pumps for | Boom, arm, bucket, and travel circuits |
| Type | Variable displacement piston x 2 |
| Maximum flow | 18.3 gpm |
| Pumps for | Swing and blade |
| Type | Gear x 2 |
| Swing pump maximum flow | 4.9 gpm |
| Swing pressure maximum | 2,915 psi |
| Blade pump maximum flow | 2.61 gpm |
| Blade pressure maximum | 3,118 psi |
| Max auxiliary flow rate at 20.5 MPa / 2,973 psi |
13.2 gpm |
| Hydraulic valve | 8 spool |
| Operating method | Hydraulic assist |
| Travel motor: | |
| Type | Variable displacement piston x 2 (with counterbalance valve and travel shaft brake) |
| Swing motor: | |
| Type | Fixed displacement piston type x 1 (with brake valve and swing shaft brake) |
| Hydraulic cylinders: (number of cylinders) |
bore x stroke x rod diameter |
| Boom (1) | 3.35 x 22.0 x 1.97 in |
| Arm (1) | 2.9 x 23.4 x 1.77 in |
| Bucket (1) | 2.55 x 19.29 x 1.57 in |
| Boom swing (1) | 3.74 x 18.97 x 1.97 in |
| Blade (1) | 3.74 x 5.51 x 1.77 in |
Drives and brakes
| Steering control | Two levers with pedals |
| Drive method | Hydrostatic |
| Gradeability | 30° |
| Maximum travel speed (rubber): (Auto-shift) |
|
| High | 2.85 mph |
| Low | 1.61 mph |
| Service brake | Hydraulic lock |
| Parking brake | Mechanical disc |
| Maximum drawbar pull | 7,495 lbf. |
Undercarriage
| Center frame | X-frame |
| Track frame | Box-section |
| Track type | Sealed |
| Track adjuster | Greased gun |
| Number of carrier rollers (each side) | 1 |
| Number of track rollers (each side) | 4 |
Coolant and lubricant capacity (refilling)
| Engine | 1.77 US gal |
| Hydraulic system | 5.3 US gal |
| Cooling system | 0.87 US gal |
| Fuel tank | 10.8 US gal |
| Final drive (each side) | 0.15 US gal |
Operating weight (approximate)
| ROPS canopy, rubber belt track 12” | |
| Operating Weight | 8,201 lbs |
| Ground pressure ISO 16754 | 5.20 psi |
| ROPS cab, rubber belt track 12” | |
| Operating Weight | 8,532 lbs. |
| GGround pressure ISO 16754 | 5.07 psi |
Blade
| Width x height | 5 ft. 9 in x 1 ft. 2 in |
ENGINE
- Air cleaner, double element with auto dust evacuator
- Cooling fan, suction type
ELECTRICAL SYSTEM
- Alternator, 12 V/55 A
- Auto-decelerator
- Battery, 1 x 12 V/58 Ah
- Front travel light
- Starting motor 12 V/1.7 kW
- Working light on boom
HYDRAULIC SYSTEM
- Auxiliary hydraulics with one-way/two-way flow selector valve
- Foot control for auxiliary hydraulics
- ISO/SAE pattern change valve
GUARDS AND COVERS
- Fan guard
- Thermal guard
UNDERCARRIAGE
- Shoe, 12" rubber shoe
OPERATOR ENVIRONMENT
- 12 V x 1 power supply
- Automatic two-speed travel control
- High resolution 3.5” LCD color monitor
- Lock lever auto lock function
- Rear view mirrors (RH, LH)
- Retractable seat belt, 3"
- Suspension seat
- Travel alarm
- Two-post ROPS (ISO 3471) canopy
WORK EQUIPMENT
- Arms — 67.7" arm assembly with piping
- Backfill blade
- Booms — 100" boom assembly with piping
OTHER EQUIPMENT
- Auto idle shutdown
- KOMTRAX®
- Quick release buttery terminal (-)
- Swing holding brake
- Counterweight — 1,433 lb
UNDERCARRIAGE
- Road Liner track, 12"
OPERATOR ENVIRONMENT
- Cab with A/C, radio ready, auxiliary input (3.5 mm jack) read
- Proportional joysticks
WORK EQUIPMENT
- Buckets
— 12" HD bucket
— 18" HD bucket
— 24" HD bucket - Hydraulic thumb
- Mechanical quick coupler