KOMATSU PC290 LC-11
- Share
Year
2024
Manufacturer
Komastu
Model
PC290 LC-11
Condition
New
Location
Ontario
The PC290LC-11 is a mid-size hydraulic excavator designed for long reach arm and boom combined with a heavy-duty undercarriage provide extended reach with a stable platform.
Large high-strength steel castings on the boom, arm and bucket link
Closed-center load-sensing hydraulics for precise, fine control
Large displacement high-efficiency pumps provide optimal attachment flow
Large, spacious, quiet cab featuring standard air suspension seat
Large high-strength steel castings on the boom, arm and bucket link
Closed-center load-sensing hydraulics for precise, fine control
Large displacement high-efficiency pumps provide optimal attachment flow
Large, spacious, quiet cab featuring standard air suspension seat
Engine
| Model | Komatsu SAA6D107E-3* |
| Type | Water-cooled, 4-cycle, direct injection |
| Aspiration | Komatsu variable geometry turbocharged, aftercooled, cooled EGR |
| Number of cylinders | 6 |
| Bore | 4.21 in |
| Stroke | 4.88 in |
| Piston displacement | 408 in³ |
| Horsepower: | |
| SAE J1995 : Gross | 213 HP |
| ISO 9249/SAE J1349 : Net | 196 HP |
| Rated rpm | 2,050 rpm |
| Fan drive type | Mechanical |
| Governor | All-speed control, electronic. |
| *EPA Tier 4 Final emissions certified |
Hydraulics
Type: HydrauMind (Hydraulic Mechanical Intelligence New Design) system, closed-center system with load sensing valves and pressure compensated valves
| Number of selectable working modes | 6 |
| Main pump: | |
| Type | Variable displacement piston type |
| Pumps for | Boom, arm, bucket, swing, and travel circuits |
| Maximum flow | 126.5 US gpm |
| Supply for control circuit | Self-reducing valve |
| Hydraulic motors: | |
| Travel | 2 x axial piston motor with parking brake |
| Swing | 1 x axial piston motor with swing holding brake |
| Relief valve setting: | |
| Implement circuits | 5,400 psi |
| Travel circuit | 5,400 psi |
| Swing circuit | 4,190 psi |
| Pilot circuit | 470 psi |
| Hydraulic cylinders: | |
| Number of cylinders | Bore x Stroke x Rod Diameter |
| Boom / 2 | 5.5 x 51.2 x 3.9 in |
| Arm / 1 | 5.9 x 64.3 x 4.3 in |
| Bucket / 1 | 5.5 x 39.7 x 3.9 in |
Drives and Brakes
| Steering control | Two levers with pedals |
| Drive method | Hydrostatic |
| Maximum drawbar pull | 56,000 lbs. |
| Gradeability | 70%, 35° |
| Maximum travel speed: (Auto-Shift) | |
| High | 3.4 mph |
| Mid | 2.5 mph |
| Low | 1.9 mph |
| Service brake | Hydraulic lock |
| Parking brake | Mechanical disc brake |
Swing System
| Drive method | Hydrostatic |
| Swing reduction | Planetary gear |
| Swing circle lubrication | Grease-bathed |
| Service brake | Hydraulic lock |
| Holding brake/Swing lock | Mechanical disc brake |
| Swing speed | 10.5 rpm |
| Swing torque | 64,292 ft.-lbs. |
Undercarriage
| Center frame | X-frame |
| Track frame | Box-section |
| Seal of track | Sealed track |
| Track adjuster | Hydraulic |
| Number of shoes | 48 each side |
| Number of carrier rollers | 2 each side |
| Number of track rollers | 8 each side |
Coolant & Lubricant Capacity (Refilling)
| Fuel tank | 105.7 US gal |
| Coolant | 9.5 US gal |
| Engine | 6.1 US gal |
| Final drive, each side | 2.1 US gal |
| Swing drive | 1.9 US gal |
| Hydraulic tank | 34.9 US gal |
| Hydraulic system | 66.8 US gal |
| DEF tank | 6.1 US gal |
Operating Weight (Approximate)
Operating weight, including 20 ft. 2 in one-piece boom, 10 ft. 6 in arm, SAE heaped 1.85 yd³ backhoe bucket*, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment.
| Shoes | 28 in |
| Operating Weight | 67,395 lbs. |
| Ground Pressure | 7.71 psi |
| Shoes | 31.5 in |
| Operating Weight: | 68,233 lbs. |
| Ground Pressure | 6.83 psi |
| Shoes | 33.5 in |
| Operating Weight: | 68,654 lbs. |
| Ground Pressure | 6.47 psi |
| Component Weights | |
| Arm including bucket cylinder and linkage | |
| 10 ft. 6 in arm assembly | 3,157 lbs. |
| 11 ft. 6 in arm assembly | 3,316 lbs. |
| One piece boom including arm cylinder | |
| 20 ft. 2 in boom assembly | 5,397 lbs. |
| Boom cylinders x 2 | 509 lbs. |
| Counterweight | 12,148 lbs. |
| 1.85 yd³ bucket - 48 in width | 2,399 lbs. |
Sound Performance
| Exterior – ISO 6395 | 104 dB(A) |
| Operator – ISO 6396 | 70 dB(A) |
Cab
- ROPS cab (ISO12117-2)
- High back air suspension seat, with heat
- Operator Protective Guard (OPG) Level 1 top guard
- Large LCD high resolution color monitor
- Automatic climate control
- Retractable seat belt (76 mm width) with indicator
- Two 12V accessory outlets
- Rearview mirrors, right hand and left hand side
- Rearview monitoring system (1 camera)
- Travel alarm
- Operator identification system
- Hydraulic lock lever
- Skylight
Engine
- Komatsu SAA6D107E-3 Tier 4 Final
- Dry type air cleaner, double element
- Fuel pre-filter with water separator
- Fuel high efficiency filter
- Automatic engine warm up system
- Programmable auto-idle shut down
- Overheat prevention system
- Turbocharger protection system
Hydraulic controls
- Pattern change control valve (ISO to BH control)
- Working mode selection system (6 Modes)
- Dual pump, Closed Center Load Sensing System (CLSS)
- Auto-deceleration system
- Power max system
- Boom and arm holding valves
- Arm quick return valve
Technology
- Komtrax level 5.0
Electrical system
- Batteries, large capacity (2 x 12Volt)
- Battery master disconnect switch with lockout tagout
- Alternator (90Amp, 24Volt)
- Starter motor (5.5 kW)
- Secondary engine shut off switch
- Working lights (1 front RH side / 1 boom LH side)
Booms and arms
- 6150 mm (20'2") boom assembly
- 3200 mm (10'6") arm assembly
- Boom foot, boom nose, & arm end steel castings
Undercarriage and work equipment
- 800 mm (31.5") triple grouser track shoes
- 8 track / 2 carrier rollers (each side)
- Hydraulic track adjusters (each side)
- Track guiding guards, center section (each side)
- Counterweight, 5200 kg (11,464 lbs.)
- Object handling H-link
- Tie off points (ISO 14567) - Work eq. and upper structure
Guards and covers
- Revolving frame deck guards
- Revolving frame undercovers - standard
- Track frame swivel guard
- Pump / engine room partition
- Turbocharger exhaust manifold cover
- Dust net for radiator and hydraulic oil cooler
- Slip resistant foot plates
- Tool free access to engine and aftertreatment
- Left and right side hand rails
Drive and brake system
- Three speed travel with auto shift
- Double reduction type final drive
- Triple labyrinth final drive seals
*IMU for auto-tilt control and one way/two way flow hyd control unit required for operation
**With revolving frame reinforcements, Only available with super long fronts
For a complete list of available attachments, please contact your local Komatsu distributor.
Cab
- Proportional joystick control levers
- Sunvisor
- Rainvisor
- Working lights, two additional cab mounted
- Straight travel pedal
Hydraulic controls
- One way/two way flow hyd control unit
Variable flow, return filter, & accumulator
Booms and arms
- 6150 mm (20'2") boom assembly with +1 attach piping
- 3200 mm (10'6") arm assembly with +1 attach piping
- 3500 mm (11'6") arm assembly
- 3500 mm (11'6") arm assembly with +1 attach piping
Undercarriage and work equipment
- 850 mm (33.5") triple grouser track shoes
- 700 mm (28") triple grouser track shoes
- Track roller guards, full length (each side)
- Counterweight, 5500 kg (12,125 lbs.)**
Guards and covers
- Cab full front guard, OPG Level 1
- Cab full front guard, OPG Level 2
- Cab top guard, OPG Level 2
- Revolving frame undercovers - heavy duty
*IMU for auto-tilt control and one way/two way flow hyd control unit required for operation
**With revolving frame reinforcements, Only available with super long fronts
For a complete list of available attachments, please contact your local Komatsu distributor.
SUPPORT YOU CAN COUNT ON
MY KOMATSU
Access and manage all your machine telematics data, parts manuals, service manuals, software and parts ordering information from a single source anywhere, anytime.
Financing
Financing can be a major advantage for your operation, enabling you to get the equipment and service you need with terms to fit your balance sheet. Take advantage of competitive and flexible financial tools with Komatsu financing.
Warranty Programs
Experience the peace of mind that comes with Komatsu’s warranty. Komatsu offers a standard warranty on all machines — plus extended coverage options that help extend the life of your investment.