KOMATSU HB365 LC-3
Year
2024
Manufacturer
Komastu
Model
HB365 LC-3
Condition
New
Location
Ontario
Engine
Model | Komatsu SAA6D114E-6* |
Type | Water-cooled, 4-cycle, direct injection |
Aspiration | Turbocharged, aftercooled, cooled EGR |
Number of cylinders | 6 |
Bore | 4.49 in |
Stroke | 5.69 in |
Piston displacement | 540 in³ |
Horsepower: | |
SAE J1995 / Gross | 271 HP |
ISO 9249/SAE J1349 / Net | 269 HP |
Fan at maximum speed / Net | 251 HP |
Rated rpm | 1,950 |
Fan drive method for radiator cooling | Mechanical with viscous fan clutch |
Governor | All-speed control, electronic. |
*EPA Tier 4 Final emissions certified
Hydraulics
Type: HydrauMind (Hydraulic Mechanical Intelligence) system, closed-center system with load sensing valves and pressure compensated valves
Number of selectable working modes | 6 |
Main pump: | |
Type | Variable displacement piston type |
Pumps for | Boom, arm, bucket, swing, and travel circuits |
Maximum flow | 141.3 gpm |
Supply for control circuit | Self-reducing valve |
Hydraulic motors: | |
Travel | 2 x axial piston motors with parking brake |
Swing | 1 x axial piston motor with swing holding brake |
Relief valve setting: | |
Implement circuits | 5,540 psi |
Travel circuit | 5,540 psi |
Pilot circuit | 470 psi |
Hydraulic cylinders / Number of cylinders: | Bore x Stroke x Rod Diameter |
Boom / 2 | 5.5 x 58.3 x 3.9 in |
Arm / 1 | 6.3 x 71.9 x 4.3 in |
Bucket for 10 ft. 5 in and 13 ft. 2 in Arms / 1 | 5.5 x 50.6 x 3.9 in |
Drives and Brakes
Steering control | Two levers with pedals |
Drive method | Fully hydrostatic |
Maximum drawbar pull | 65,191 lbs. |
Gradeability | 70%, 35° |
Maximum travel speed: (Auto-Shift) | |
High | 3.4 mph |
Mid | 2.8 mph |
Low | 2.0 mph |
Service brake | Hydraulic lock |
Parking brake | Mechanical disc brake |
Swing System
Drive method | Electric drive |
Swing reduction | Planetary gear |
Swing circle lubrication | Grease-bathed |
Service brake | Electric brake |
Holding brake / Swing lock | Mechanical disc brake |
Swing speed | 9.5 rpm |
Swing torque | 82,313 ft.-lbs. |
Undercarriage
Center frame | X-frame |
Track frame | Box-section |
Track type | Seale |
Track adjuster | Hydraulic |
Number of shoes | 48 each side |
Number of carrier rollers | 2 each side |
Number of track rollers | 8 each side |
Coolant & Lubricant Capacity (Refilling)
Fuel tank | 159.8 US gal |
Coolant (Engine) | 11.1 US gal |
Ultra capacitor cooling system | 3 US gal |
Engine | 10.2 US gal |
Final drive, each side | 2.4 US gal |
Swing drive | 4.12 US gal |
Swing motor - generator | 0.95 US gal |
Motor-generator | 2.25 US gal |
Hydraulic tank | 49.7 US gal |
DEF tank | 10.3 US gal |
Sound Performance
Exterior – ISO 6395 | 101 dB(A) |
Operator – ISO 6396 | 69 dB(A) |
Operating Weight (Approximate)
Operating weight including 21 ft. 3 in one-piece HD boom, 10 ft. 5 in arm, 33.5 in track shoes, SAE heaped 2.56 yd3 bucket, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment.
Triple-Grouser | Operating Weight | Ground Pressure (ISO 16754) |
28 in | 83,012 lbs. | 8.79 psi |
31.5 in | 83,894 lbs. | 7.77 psi |
33.5 in | 84,335 lbs. | 7.35 psi |
ENGINE
- Auto idle
- Auto idle shut down programmable
- Automatic engine warm-up system
- Dry type air cleaner, double element
- Engine, Komatsu SAA6D114E-6
- Engine coolant to -25°C -13°F
- Engine overheat prevention system
- Fuel pre-filter (10 micron, with water separator)
- Fuel priming pump
- Viscous fan clutch, temperature controlled
HYBRID SYSTEM
- Ultra capacitor with inverter
- Electric swing motor/generator
- Engine mounted motor/generator
- Hybrid component cooling system
ELECTRICAL SYSTEM
- Alternator, 24 V/90 A
- Batteries, large capacity (2 x 12V)
- Battery master disconnect switch
- Electric horn
- Power ports (2) 24V to 12V
- Starting motor, 24 V/11 kW
- Working lights, 2 (Boom and RH front)
HYDRAULIC SYSTEM
- Arm holding valve
- Boom holding valve
- Power maximizing system
- PPC hydraulic control system
- Service valve, one additional function
- Two-mode setting for boom
- Working mode selection system
GUARDS AND COVERS
- Carbody swivel guard
- Pump/engine compartment partition
- Revolving frame deck guards
- Revolving frame under covers
- Slip resistant plates
- Thermal and fan guards
- Track roller guards (center section)
UNDERCARRIAGE
- 3 speed travel with auto shift
- Carrier roller (2 each side)
- Hydraulic track adjusters (Each side)
- Track roller, 8 each side
- Track shoe, triple grouser, 33.5"
OPERATOR ENVIRONMENT
- Auxiliary input (3.5 mm jack)
- Automatic climate control/air conditioner/heater/defroster
- High back air suspension seat with heat
- Large high resolution 7" LCD monitor
- Lock lever, work equipment
- Mirrors (RH and LH)
- Operator protective top guard (OPG), level 1
- Rear view monitor system - one camera
- ROPS cab (ISO 12117-2)
- Seat belt indicator
- Seat belt, retractable, 3"
- Secondary engine shut down switch
- Skylight, opening
OTHER EQUIPMENT
- AM/FM radio
- Counterweight, 13,933 lb
- Equipment Management Monitoring System (EMMS)
- KOMTRAX® level 5.0
- Operator identification system
- Radiator and oil cooler removable debris screen
- Rear reflector
- Travel alarm
US systemMetric
Arms:
- 10'5" arm assembly
- 10'5" arm assembly with piping
- 13'2" arm assembly
- 13'2" arm assembly with piping
Booms:
- 21'3" HD boom assembly
- 21'3" HD boom assembly with piping
Cab guards:
- Lower front window guard
- Full front guard, OPG Level 1
- Full front guard, OPG Level 2
- Bolt-on top guard, OPG Level 2
Other:
- KomVision surround camera system
- Hydraulic control unit, 1 actuator
- Proportional control handles for auxiliary hydraulics
- Rain visor
- Revolving frame undercovers, heavy duty
- Sun visor
- Track roller guards, full length
- Track shoes, triple grouser, 28"
- Track shoes, single grouser, 31.5"
- Working lights, front, two additional cab mounted
SUPPORT YOU CAN COUNT ON
Warranty Programs
Experience the peace of mind that comes with Komatsu’s warranty. Komatsu offers a standard warranty on all machines — plus extended coverage options that help extend the life of your investment.