KOMATSU D475A-8
Get a quote
2024
Komastu
D475A-8
New
Ontario
Strength and performance
When you need a versatile mining dozer that can go from ripping solid rock to cleaning up around the dragline, the Komatsu D475A-8 is a solid choice. Using an automatic lockup torque converter, the D475A-8 combined power and speed is designed for high production with minimal fuel consumption.
- Up to 10% productivity increase over previous models
- Over 11% more engine power in the reverse direction versus the forward direction
- 10% reduction in fuel consumption with automatic transmission with lockup torque converter compared to operation in manual gearshift mode
Engine
Model | Komatsu SAA12V140E-7 |
Type | 4-cycle, water-cooled, direct injection |
Aspiration | Turbocharged, air-to-air charge air cooler, cooled EGR |
Number of cylinders | 12 |
Bore x stroke | 5.51 x 6.50 in |
Piston displacement | 1,860 in3 |
Horsepower | |
SAE J1995 | Gross: Forward 934 HP Reverse: 1,040 HP |
ISO 9249/SAE J1349* | Net: Forward 890 HP Reverse 968 HP |
Rated rpm | 2,000 rpm |
Fan drive type | Hydraulic |
Lubrication system | |
Method | Gear pump, force lubrication |
Filter | Full-flow |
* Net horsepower at the maximum speed of radiator cooling fan |
Forward/reverse 860/968 HP |
U.S. EPA Tier 4 Final emission certified |
TORQFLOW transmission
Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 1-phase torque converter with lockup clutch and a planetary gear, multiple-disc clutch transmission which is hydraulically actuated and force-lubricated for optimum heat dissipation. Gearshift lock lever and neutral safety switch help prevent accidental starts.
Gear | Forward | Reverse |
1st | 2.1 mph | 2.7 mph |
2nd | 3.9 mph | 5.2 mph |
3rd L | 4.6 mph | 5.6 mph |
3rd | 7.2 mph | 8.9 mph |
Final drive
Steering system
Palm Command Control System (PCCS), joystick controlled, wet multiple-disc steering clutches are spring-loaded and hydraulically released. Wet multiple-disc, pedal/lever controlled steering brakes are spring-actuated hydraulically released and require no adjustment. Steering clutches and brakes are interconnected for easy, responsive steering.
Minimum turning radius | 15 ft. 1 in |
Undercarriage
Suspension: Oscillating equalizer bar and pivot shaft
Track roller frame: Cylindrical, high-tensile-strength steel construction
Rollers and idlers: Lubricated track rollers
Komatsu Bogie (K-Bogie) undercarriage: Lubricated track rollers are resiliently mounted to the track frame with a bogie suspension system whose oscillating motion is cushioned by rubber pads.
Extreme Service Track Shoes: Lubricated tracks. Unique seals prevent entry of foreign abrasives into pin to bushing clearances to provide extended service life. Track tension is easily adjusted with grease gun.
Number of shoes (each side) | 41 | ||
Grouser height: | |||
Single grouser | 4.1 in | ||
Shoe width (standard) | 28 in | ||
Ground contact area* | 9,957 in² | ||
Ground pressure (tractor)** | 16.71 psi | ||
Number of track rollers | 8 | ||
Number of carrier rollers | 2 | ||
Extreme service shoes | Additional weight | Ground contact area* | Ground pressure** |
32 in | 2,028 lbs. | 11,360 in² | 17.1 psi |
36 in | 4,034 lbs. | 12,763 in² | 15.4 psi |
*Ground contact area calculated by track on ground, center idler to center sprocket
**Ground pressure calculated using ISO 16754
Coolant and lubricant capacity (refill)
Fuel tank | 507.2 US gal |
Coolant | 70 US gal |
Engine | 31.7 US gal |
Torque converter, transmission, bevel gear, and steering system | 55.5 US gal |
Final drive (each side) |
Operating weight (approximate)
Tractor | 194,450 lbs. |
Including rated capacity of lubricant, coolant, full fuel tank, operator, and 710 mm (28 in) shoe, less front and rear attachments. | |
Operating weight | 254,195 lbs. |
Includes dual tilt U dozer, giant variable ripper, cab, ROPS (ISO 3471), operator, standard equipment, rated lubricant volumes, coolant, full fuel tank and 810 mm (32 in) track shoes. |
|
Ground pressure* | 19.35 psi |
*Ground pressure calculated using ISO 16754
Hydraulic system
Hydraulic control unit | |
Closed-center load sensing system (CLSS) designed for precise and responsive control, and for efficient simultaneous operation. | |
All spool control valves externally mounted beside the hydraulic tank. Variable piston pump with capacity (discharge flow) of 541 L/min (142.9 US gpm) for implement at rated engine rpm. | |
Relief valve setting | 3,983 psi |
Control valves | |
Spool control valves for Semi-U tilt dozer and Full-U tilt dozer. | |
Positions: | |
blade lift | Raise, hold, lower, and float |
blade tilt | Right, hold, and left |
Additional control valve required for variable digging angle multi-shank ripper and giant ripper. | |
(Spool control valves for variable digging angle multi-shank ripper and giant ripper.) | |
Positions: | |
ripper lift | Raise, hold, and lower |
ripper tilt | Increase, hold, and decrease |
Hydraulic cylinders | Double-acting, piston |
Number of cylinders | Bore |
Blade lift / 2 | 7.1 in |
Blade tilt (single tilt) / 1 | 9.8 in |
Blade title (dual tilt) / 2 | 9.8 in |
Ripper lift / 2 | 8.9 in |
Ripper tilt / 2 | 8.9 in |
Hydraulic oil capacity (refill) | |
Semi-U dozer or U dozer | 50.2 US gal |
Ripper equipment (additional volume) | |
Giant ripper | 34.3 US gal |
Multi-shank ripper (variable) | 34.3 US gal |
Operator environment and equipment
- Air conditioner and heater with automatic climate control and defroster
- Back-up alarm
- Decelerator pedal
- Double wiper for cab door
- Horn, warning
- LED lighting package
- Access lamps (4)
- Additional cab mount (4)
- Front fender mount (2)
- High mount on hood (2)
- Rear fender mount (2)
- Ripper point light
- Lunch box holder
- Mirror, rearview
- Palm Command Control Steering (PCCS) system
- Provisions for power ladder installation
- Radio, AM/FM, AUX, bluetooth
- Rearview monitoring system
- ROPS (meets ISO 3471 standards)
- Weight: 1,634 lbs.
- Width: 6‘11“
- Height: 6‘3“ (compartment floor to ceiling)
- Seat
Air suspension, fabric, low back rest, head rest, heated and ventilated - Seat belt, 3” retractable
- Uninterupted power source for 3rd party system
Powertrain
- Auto/manual gearshift (3F/3R) TORQFLOW transmission
Torque converter with lock-up clutch - Alternator, 140 Amps, 24V
- Batteries, large capacity, 4 x 12 V, 160 Ah
- Circuit breaker panel w/ push button resets
- Dry-type air cleaner with dust evacuator and dust indicator
- Electrical engine oil and coolant heaters
- Engine intake precleaner
- Engine prelubrication system
- Final drive scraper, wear guard
- Hydraulically driven radiator fan, swing out, reversible
- Perforated side covers
- Radiator, fin and tube type, copper core
- Starting motors, 15 kW. (2 x 7.5 kW.), 24 V
- Steering, wet clutch and brake
Undercarriage
- Extreme service shoes with cold link assemblies
- 28” shoe width
- Hydraulic track adjusters
- Idler spring tensioner, additional preload
- Labryinth-type track rollers
- Segmented sprocket segments
- Track roller guards
Dozer equipment
- Hydraulics and cab controls for dual-tilt dozer equipment
Rear attachment
- Hydraulics and cab controls for giant variable ripper
Service and maintenance
- Anchor points for service lanyards
- Canister-type, remote breathers
- Centralized greasing (blade cylinder yoke and Ripper)
- Concentrated live oil sampling ports
- Engine emergency stop system
- Engine room light
- Electrical dust indicator
- Electrical engine oil level sensor
- Electrical hydraulic oil level sensor
- Fast fill fuel system
- Hinged underguards with front pull hoook
- Isolators, battery and starter
- Jump start recepticle
- Service fill and evacuation center, ground-level
Hyd. oil, eng. oil, T/M oil, and coolant - Platform with hand rails and toe boards
- PM service connectors
- Radiator site gauge
- Vandalisim protection kit (cover locks)
Technology
- Auto-idle stop system
- Auto-pitch blade control
- Autor-ripper return
- KOMTRAX PLUS® WITH Iridium + WIFI
- Track shoe slip control
Special arrangements
- Cold area arrangement (-30 C˚- +40 C˚)
- High altitude arrangement
- Mining specification
- MSHA regulation arrangement (dust)
- OSHA (USA) regulation arrangement
- Sandy and dusty area arrangement
Operator environment and equipment
- Finger Command Control (FCCS) steering system
- Power ladder
Undercarriage
- Extreme service shoes with cold link assemblies
- 32” shoe width
- 36” shoe width
Dozer equipment
- Blade Semi-U, stengthened dual-tilt, 35.6 yd³
- Blade Full-U, strengthened dual-tilt, 45.0 yd³
- Straight fame assembly, dual-tilit, less blade
Rear attachment
- Counterweight with hitch - 13,395 lbs.
- Counterweight, additional with hitch - 14,509 lbs.
- Ripper assembly, giant variable, long protector
- Variable, single shank ripper ideal for tough ripping applications. Ripping angle is variable. Ripping depth is adjustable with a hydraullically controlled pin-puller
- Weight: 15,895 lbs.
- Beam length: 4’11”
- Maximum lift above ground: 4’0”
- Maximum digging depth: 6’1”
- Ripper Assembly, multi-shank
- Three shank assembly with hydrualically controlled lift and tilt functionality.
- Weight: 21,430 lbs.
- Beam length: 10’1”
- Maximum lift above ground: 4’0”
- Maximum digging depth: 4’1”