KOMATSU D65PXi-18
2024
Komastu
D65PXi-18
New
Ontario
A workhorse for your fleet
Move heavy loads in soft or wet conditions. The D65PXi-18’s long track/low ground pressure offers outstanding flotation and extended wear life undercarriage with the 36” wide Parallel Link Undercarriage System (PLUS) rotating bushing track shoes. Fine tune it with a choice of blade options.
- Get new operators up to speed quickly
- Go from mass ex to finished grading faster than ever
- Fully integrate 3D design data into your machines
- Empower operators to work efficiently, pass after pass
Engine
Model | Komatsu SAA6D114E-6* |
Type | 4-cycle, water-cooled, direct injection |
Aspiration | Komatsu variable geometry turbocharged, air-to-air aftercooled |
Number of cylinders | 6 |
Bore x stroke | 4.49 x 5.69 in |
Piston displacement | 540 in³ |
Governor | All-speed and mid-range, electronic |
Horsepower: | |
SAE J1995 - Gross | 220 HP |
ISO 9249 / SAE J1349 - Net | 217 HP |
Rated rpm | 1,950 rpm |
Fan drive type | Hydraulic |
Lubrication system: | |
Method | Gear pump, force lubrication |
Filter | Full-flow |
*EPA Tier 4 Final emissions certified |
TORQFLOW Transmission
Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 2-phase, torque converter with lockup clutch, and a planetary gear, multiple-disc clutch transmission which is electronically controlled, hydraulically actuated and force-lubricated for optimum heat dissipation. Shift lock lever and neutral safety switch.
Travel speed | Forward | Reverse |
1st | 2.3 mph | 2.8 mph |
2nd | 3.5 mph | 4.2 mph |
3rdL | 4.5 mph | 5.4 mph |
3rd | 7.0 mph | 8.5 mph |
Final drive
Steering system
Palm Command Control System (PCCS) lever controls for all directional movements. Pushing the PCCS lever forward results in forward machine travel, while pulling it rearward
reverses the machine. Simply tilt the PCCS lever to the left for a left turns, tilt it right for right turns.
Hydrostatic Steering System (HSS) power has been increased 25% by a larger HSS motor, greater hydraulic pump flow, and more engine power while steering. The result is more powerful turns and quicker counter-rotation. Wet, multiple-disc, pedalcontrolled service brakes are spring-actuated and hydraulically released. Gear shift lock lever also applies parking brake.
Minimum turning radius: | |
D65EX-18 | 6 ft. 3 in |
D65EXi-18 | 6 ft. 3 in |
D65PX-18 | 7 ft. 3 in |
D65PXi-18 | 7 ft. 3 in |
D65WX-18 | 6 ft. 11 in |
Undercarriage
Suspension | Oscillating equalizer bar and pivot shaft |
Track roller frame | Monocoque, large section, durable construction |
Rollers and idlers | Lubricated |
Track shoes | Parallel Link Undercarriage System (PLUS) with lubricated rotating bushings for extended system wear life and lower maintenance costs. Track tension is easily adjusted with grease gun. |
Tractor for inside mounted blade (Requires Waste Package)*
D65PX-18 | |
Number of track rollers (each side) |
8 |
Type of shoes (standard) | ES PLUS clipped |
Number of shoes (each side) | 45 |
Grouser height | 2.6 in |
Shoe width (standard) | 30 in |
Ground contact area (ISO 16754) |
8,619 in2 |
Ground pressure (tractor) (ISO 16754) |
5.51 psi |
Track gauge | 7 ft. 4 in |
Length of track on ground | 10 ft. 9 in |
*See page 17 of spec sheet for tractor/blade combinations.
Service refill capacities
Fuel tank | 109.6 US gal |
DEF tank | 6.2 US gal |
Coolant | 12.9 US gal |
Engine | 8.1 US gal |
Torque converter, transmission, bevel gear, and steering system | 12.7 US gal |
Final drive (each side) | 7.1 US gal |
Hydraulic system
Closed-center load sensing system (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Hydraulic control units:
All spool valves externally mounted beside the hydraulic tank. Piston type hydraulic pump with capacity (discharge flow) of 65.5 US gpm at rated engine rpm.
Relief valve setting | 4,050 psi |
Control valves: | |
Spool control valves for SIGMADOZER® or straight tilt dozer | |
Positions: | |
Blade lift | Raise, hold, lower, and float |
Blade tilt | Right, hold, and left |
Rear attachment | Raise, hold, and lower |
- Air cleaner, double element with dust indicator
- Alternator, 90 ampere/24V
- Auto idle shutdown function
- Backup alarm
- Batteries, 200 Ah/2 x 12V
- Battery disconnect switch
- Blade lift cylinders
- Color monitor, LCD
- Decelerator pedal
- Engine hood
- Engine intake centrifugal precleaner
- Engine, gull-wing side covers
- Engine shutdown secondary switch
- Fenders
- Front pull hook
- High mount foot rests
- Horn, warning
- Hydraulic driven radiator cooling fan with reverse clean mode
- Hydraulics for rear equipment
- KOMTRAX® Level 5
- Komatsu Diesel Particulate Filter (KDPF)
- Komatsu Variable Geometry Turbocharger (KVGT)
- Locks, filler caps and covers
- Muffler with curved exhaust pipe
- Oil pressure check ports for power train
- Operator ID function
- PM service connector
- Radiator mask, heavy-duty, hinged, perorated
- Radiator reserve tank
- Rear cover
- ROPS cab**
- 75 dB operator ear noise level
- Air conditioner
- Cab accessories
--12V power supply (2 ports)
--Cup holder
--Rearview mirror
--Rear view monitoring (1 camera)
--AM/FM Radio w/remote AUX plug (3.5 mm) - Shovel holder
- Work lights
--2 front, hood mounted
--2 front, cab mounted
--1 rear, left fender mounted
--2 rear, cab mounted
- Seat, air suspension, fabric, heated low back, rotates 12.5° to right, headrest
- Seat belt, 3", retractable
- Seat belt indicator
- Sealed electrical connectors
- Secondary engine shutoff switch
- Starting motor, 24V
- Steering system: Hydrostatic Steering System (HSS)
- Torque converter with auto lock-up
- Track roller guards, center and end sections
- Track shoe assembly
Heavy-Duty lubricated rotary bushing (PLUS) track- 24" MS shoe (EXi with outside mount blade)
- 36" MS shoe (PXi with outside mount blade)
- Underguards, heavy duty
- Hinged belly pan
- Transmission
- Water separator
- Wide core cooling package
* Dozer assembly and rear mounted equipment are not included in base machine standard equipment
** Cab meets OSHA/MSHA ROPS and FOPS Level 2 standards
- Dozer assembly
- Drawbar, long type
- Hitch
- Rear counterweight 1,870 lb
- Track roller guard, full length
Multi-shank ripper (for D65EXi-18)
- Weight, 4,230 lb
- Beam length, 7'1"
- Maximum lift above ground, 2'1"
- Maximum digging depth, 1'11"