You are browsing in !
Country:
State:
City:
Latitude:
Longitude:
IP:

KOMATSU HD605-8

  • Share
Request a Quote

Get a quote

Close

DOWNLOAD SPECS
Year

2024

Manufacturer

Komastu

Model

HD605-8

Condition

New

Engineered for long machine life

Known for durability and long-life frames, the HD605-8 mechanical truck was engineered for exceptional longevity. Featuring hydro-pneumatic suspension, a tight turning radius and superior ride, this truck is an excellent choice for quarry operations and more.

  • Up to 7% reduction in fuel consumption*
  • Up to 3% more productive*
  • Enhanced serviceability*
  • Improved operator environment*

    *Compared to HD605-7

Engine

 
Model Komatsu SAA6D170E-7*
Type Water-cooled, four-cycle
Aspiration Variable geometry, turbo-charged, air-to-air after-cooled, cooled Exhaust Gas Recirculation (EGR)
Number of cylinders 6
Bore x stroke 6.69 x 6.69 in
Piston displacement 1,413 in³
Horsepower:  
    SAE J1995 / Gross 775 HP
    ISO 9249 / SAE J1349 / Net 724 HP
    Rated rpm 2,000 rpm
Maximum torque 2,688 lbs.-ft.
Fuel system Direct injection
Governor Electronically controlled
Lubrication system:  
    Method Gear pump, force-lubrication
    Filter Full-flow type
Air cleaner Dry type with double elements and precleaner (cyclone pack type), and evacuator valve

*EPA Tier 4 Final emissions certified

 
Transmission
Torque converter Three-elements, one-stage, two-phase
Transmission Full-automatic, planetary type
Speed range Seven speeds forward and one reverse
Lockup clutch Wet, multiple-disc clutch
Forward Torque converter drive in 1st gear, direct drive in 1st lockup and all higher gears
Reverse Torque converter drive
Shift control Electronic shift control with automatic clutch modulation in all gears
Maximum travel speed 43.5 mph
 
Axles
Rear Axle Full-floating
Final drive type Planetary gear
Ratios:  
Differential 3.538
Planetary 4.737
 
Suspension System

Independent, hydro-pneumatic suspension cylinder with fixed throttle to dampen vibration

Effective cylinder stroke (front suspension) 11.9 in
Rear axle oscillation:  
Oil stopper 6.8°
Mechanical stopper 7.7°
 
Steering System
Type Full-hydraulic power steering with two double-acting cylinders.
Supplementary steering Manually controlled
(meets ISO 5010)
Minimum turning radius 28 ft. 7 in
Maximum steering angle 39°
 
Cab

Dimensions comply with ISO 3471 ROPS (Roll-Over Protective Structure) standards.

 
Brakes

Brakes meet ISO 3450 standards.

Service brakes:  
Front Dry type, single disc type full hydraulic
Rear Oil cooled, multiple disc type full hydraulic
Parking brake Oil cooled, multiple disc type, spring operated, hydraulic releasing type
Retarder Oil cooled, multiple disc type full hydraulic
Secondary brake Manual pedal operation when hydraulic pressure drops below the rated level, parking brake is automatically actuated

Main Frame

Type

Box-sectioned structure

Body

Capacity:  
    Struck 37.9 yd³
    Heaped (2:1, SAE) 52.3 yd³
Payload 69.4 US tons
Material
high tensile strength steel
184,900 psi
Material thickness:  
    Bottom 0.75 in
    Front 0.47 in
    Sides 0.35 in
Target area
(inside length x width)
21 ft. 2 in x 12 ft. 8 in
Height at full dump 28 ft. 10 in
Heating Exhaust heating

Hydraulic System

Hoist cylinder Twin, two-stage telescopic type
Relief pressure 2990 psi
Hoist time 11.5 s

Weight (approximate)

Empty weight 113,803 lbs.
Nominal gross vehicle weight:  
   Standard tire 252,870 lbs.
*Max. gross vehicle weight:  
   Standard tire 266,759 lbs.
Weight distribution:  
   Empty:  
      Front axle 51%
      Rear axle 49%
   Loaded:  
      Front axle 33%
      Rear axle 67%

*When payloads are managed per Komatsu's 10-5-10 payload policy

Tires

Standard tire: 24.00 R35

Service Refill Capacities

Fuel tank 211.3 US gal
Engine oil 21.1 US gal
Torque converter, transmission
and retarder cooling
56.8 US gal
Differentials 25.1 US gal
Final drives (total) 11.1 US gal
Hydraulic system 39.4 US gal
Suspension (total) 17.5 US gal

ENGINE:

  • Air cleaner, dry type, two stage (qty two)
  • Automatic Idling Setting System (AISS)
  • Auto Idle Shutdown
  • Electric priming fuel pump
  • Engine secondary stop switch
  • Engine, Komatsu SAA6D170E-7, six cylinder, turbocharged, air/air aftercooled, EGR cooled, diesel; Gross HP (SAE J1995): 775HP / 2000 RPM; Net HP (ISO
  • 9249/SAE J1349): 724HP / 2000 RPM
  • Fan, hydraulically driven, reversible
  • Komatsu Diesel Particulate Filter (KDPF) (qty two)
  • Starting aid, intake manifold pre-heater
  • Variable geometry turbocharger

ELECTRICAL SYSTEM:

  • Alternator, 90 ampere , 24 volt
  • Back-up alarm
  • Batteries, 4 x 12 volt 240 Ah, 910 CCA
  • Battery disconnect switch
  • Horn, electric
  • Lights
    - Back-up light, rear
    - Engine compartment ligh
    - Head lights, halogen (high and low beam)
    - Side working lights, LH and R
    - Stop and tail lights (LED)
    - Turn signal, (two front, two rear) (LED) with hazard switch
  • Starting motors, 2 x 7.5W direct electric 24V

POWER TRAIN AND CONTROLS:

  • Seven-speed transmission, fully automatic with K-ATOMiCS
  • Komatsu Traction Control System (KTCS)
  • Front brake, twin caliper, disc type
  • Parking brake
  • Rear brake, oil cooled, multiple disc, fully hydraulic controlled
  • Skip shift function

OPERATOR ENVIRONMENT:

  • Cab, with built in ROPS/FOPS
    - 12 Volt outlet (qty two)
    - Automatic climate control system with cab pressurization
    - Auxiliary steering system
    - Beverage holder (qty two)
    - Body hoist control, electric
    - Cigarette lighter and ashtray- Dome light and reading light
    - Door, LH and RH
    - Lunch box tray and storage trays
    - Machine monitor with seven-inch color LCD display
    - Operator seat, air suspension type, heated, ventilated, with three-point retractable seat belt (3" wide lap belt and 2" wide, high visibility shoulder belt)
    - Power windows, LH and RH
    - Radio, AM/FM with aux terminal
    - Rearview mirror, outside cab mount, heated (LH & RH)
    - Rearview monitoring system with dedicated monitor
    - Steering wheel, tilt and telescopic
    - Sun visor (qty two)
    - Tinted glass (front, laminated glass)
    - Trainer seat, folding, with two-point retractable seat belt (3" wide)
    - Wiper/washer, front, with intermittent setting

GUARD AND COVER GROUP:

  • Catwalk with handrails
  • Deck rail
  • Driveline guards, front & rear
  • Engine underguard
  • Exhaust thermal guard
  • Front handrail, over radiator
  • Mudguards
  • Transmission underguard

MONITORING SYSTEM, ELECTRONIC DISPLAY ITEMS:

  • Instrument panel gauges
    - Coolant temperature
    - Hour meter (service meter)
    - Retarder oil temperature
    - Speedometer with odometer
    - Tachometer
    - Torque converter oil temperature
  • Warning lights
    - Engine coolant temperature
    - Engine coolant level
    - Engine oil pressure
    - Parking brake
    - Retarder oil temperature
    - Torque converter oil temperature

OTHER:

  • Angled front stairs with hand rails
  • Automatic retarder speed control (ARSC)
  • Centralized lube block
  • Dump counter
  • Ecology guidance and ecology gauge
  • Fast-fill coupler for fuel tank
  • Filler cap and cover locks
  • Front brake cut-off system
  • Hydropneumatic suspension (front & rear)
  • Less body (must select body)
  • Mirror, rearview, underview
  • PM service connectors
  • Rock ejector bars
  • KOMTRAX Plus® telematics package with integrated payload meter (PLM), satellite communication and WiFi
  • Wheel chocks with storage brackets

BODY:

  • Alternate exhaust configuration (RH side discharge)
  • Body
  • Body liner

TIRES (24.00 R35):

  • Michelin XDTB
  • Bridgestone VRLS
  • Michelin X-Quarry
  • Michelin X-Traction Super Terrain

SUPPORT YOU CAN COUNT ON

FINANCING

Financing can be a major advantage for your operation, enabling you to get the equipment and service you need with terms to fit your business needs. Take advantage of competitive and flexible financial tools with Komatsu Financial.

MY KOMATSU

Access and manage all your machine telematics data, parts manuals, service manuals, software and parts ordering information from a single source anywhere, anytime.

WARRANTY PROGRAMS

Experience the peace of mind that comes with Komatsu’s warranty. Komatsu offers a standard warranty on all machines — plus extended coverage options that help extend the life of your investment.

SIMILAR PRODUCTS

KOMATSU HD325-8

CONTACT US FOR PRICING

KOMATSU HD465-8

CONTACT US FOR PRICING

KOMATSU HM300-5

CONTACT US FOR PRICING

KOMATSU HM400-5

CONTACT US FOR PRICING

KOMATSU HD405-8

CONTACT US FOR PRICING

KOMATSU HD785-8

CONTACT US FOR PRICING